Sure Henk
![thumbs Up :thumbsup:](./images/smilies/023.gif)
I keep seeing little things and doing the odd tweak. Unfortunately, the panel lines on the rear fuse were (are) out and by some degree. When I'm
trying to get something close.. I use lineups.. black lines drawn around and between things so that I can get one side right then put the lineup lines on the other side at a known reference point and all should be good. I looked at it from the rear and SHITE!! The panel lines are about 12 pixels out
I really wish I could do the Doppler panel in between the 2 blade aerials under the cockpit but there's something pulling the middle of it aft directly where the two halves join. Not sure if it's stray poly's or what. Solid colours are fine as long as you don't want additional detail!
Also.. the right outer plyon has no placards even though there are 4 sets (one for each outer rail) on the map. They pylon has panel lines so I reckon the placards are in the wrong place
![Rolling eyes 8)](./images/smilies/rolleyes.gif)
Wonder if Pat was a beta tester
There are other little bits I'd like to add but the model isn't playing. That said.. I'll try a few more things and when I get fed up with banging my head against a wall.. you'll be more than welcome to a copy.
I've gotta say that the paints you've produced for the meatbox are better than those that came with the model. I keep downloading and adding them even if I'm not flying the model
ATB
DaveB
![Cool Smoke B)smk](./images/smilies/025.gif)