Model Converter
Moderators: Guru's, The Ministry
Model Converter
Is anyone using ModelConverterX?
I have just tried to look at it for the first time, but it's crashing on start-up, every time
I'm wondering if it's a Win7 or 64bit thing.
I have just tried to look at it for the first time, but it's crashing on start-up, every time
I'm wondering if it's a Win7 or 64bit thing.
- DaveG
- The Gurus
- Posts: 7818
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: Model Converter
Works fine for me on Win7-64.
Are you using the latest development release? http://www.scenerydesign.org/development-releases/
Are you using the latest development release? http://www.scenerydesign.org/development-releases/
Dave G.
- Tako_Kichi
- Concorde
- Posts: 1490
- Joined: 12 Oct 2007, 19:39
- Location: SW Ontario, Canada (ex-pat Brit)
Re: Model Converter
I used to use MCX a lot for checking models and textures but at some point last year it simply stopped working and now I get the same as you, just refuses to start in Win 7 64 bit.
I've even tried removing MCX and all traces of it and re-installing the latest version and still no go.
It's very frustrating as it's a very useful tool and I depended on it when I migrated an entire model from one modeling program to another.
I've even tried removing MCX and all traces of it and re-installing the latest version and still no go.
It's very frustrating as it's a very useful tool and I depended on it when I migrated an entire model from one modeling program to another.
Larry
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: Model Converter
This is odd. I use MCX quite a lot with Win7-64 and it works fine for me too Can't imagine what the answer might be I use the latest development release like Dave but I did have to select this option. It worked out of the box with WinXP and checked for the LDR automatically but I remember I had to select it with Win7. Other than that.. it's worked fine and never crashed the system
ATB
DaveB
ATB
DaveB
Old sailors never die.. they just smell that way!
Re: Model Converter
Thanks for your comments.
I did download the latest version, yes. I was going to see if it would be useful for checking repaints without having to go into FSX/P3D. I did use something quite recently for that purpose, but I don't know which programme it was, any more.
I'm just doing an online course in Corel Painter X with the intention of using it for painting in these sims and DCS World. After using it as my main paint prog for about 15 years, I think Paint Shop Pro 5 has finally had its day!
Hold on a sec... am I getting mixed up? Is this the prog I would use to adjust NDB ranges?
I did download the latest version, yes. I was going to see if it would be useful for checking repaints without having to go into FSX/P3D. I did use something quite recently for that purpose, but I don't know which programme it was, any more.
I'm just doing an online course in Corel Painter X with the intention of using it for painting in these sims and DCS World. After using it as my main paint prog for about 15 years, I think Paint Shop Pro 5 has finally had its day!
Hold on a sec... am I getting mixed up? Is this the prog I would use to adjust NDB ranges?
- Tako_Kichi
- Concorde
- Posts: 1490
- Joined: 12 Oct 2007, 19:39
- Location: SW Ontario, Canada (ex-pat Brit)
Re: Model Converter
Out of pure idle curiosity I just tried to run MCX again and bugger me if the darn thing isn't working perfectly again despite refusing to work for months of trying!
I then Dl'd the supposed latest version and that seems to be working too although I did get a prompt telling me there was a newer version so I'm not sure if I have the latest version or not (for interest I'm now running v1.4.0.0 r2863).
Not sure what stopped it working on my system but it appears to be working again now.
BTW John you may want to make sure you have given the .exe file admin rights (right-click on it and then select 'Properties', then select the 'Compatibility' tab and make sure 'Run the program as an Administrator' is checked then close all the windows. I seem to remember having a few issues with various FSX tools until I had done that to the respective .exe files.
I then Dl'd the supposed latest version and that seems to be working too although I did get a prompt telling me there was a newer version so I'm not sure if I have the latest version or not (for interest I'm now running v1.4.0.0 r2863).
Not sure what stopped it working on my system but it appears to be working again now.
BTW John you may want to make sure you have given the .exe file admin rights (right-click on it and then select 'Properties', then select the 'Compatibility' tab and make sure 'Run the program as an Administrator' is checked then close all the windows. I seem to remember having a few issues with various FSX tools until I had done that to the respective .exe files.
Larry
Re: Model Converter
Just thought I'd chip-in to say I've also been using Model Converted X in Win7-64 with no probs. What a godsend it's been too for viewing paintjobs in progress! With nVidia Inspector, it's also possible to apply high levels of anti-aliasing and aniso-whatsit and produce very crisp visuals indeed.
Cheers,
Nick
Cheers,
Nick
- DaveG
- The Gurus
- Posts: 7818
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: Model Converter
Looking at the manual, it requires M$ .NET V2.0. Have you got that installed?
Dave G.
Re: Model Converter
In theory, that means it should run fine if you have .NET v4.0 or later installed without having v2.0 installed as well. I'd be interested to know if anyone has it running with this configuration, but I suspect that the real v2.0 is always going to be required. Thanks in advance for any input,
regs,
Ro
regs,
Ro
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: Model Converter
Hi Ro
I've just checked my installed progs and I only have .NET Framework 4 Client Profile and .NET Framework 4 Extended
ATB
DaveB
I've just checked my installed progs and I only have .NET Framework 4 Client Profile and .NET Framework 4 Extended
ATB
DaveB
Old sailors never die.. they just smell that way!