I have been working on a PSA repaint for the default DC-3. I am almost finished but can't figure out how to turn off the display of the registration numbers. Does anybody know what controls this?
One annoying thing I found about the default DC-3 is that the textures on the starboard side of the tail is a mirror of other side and any text on it is reversed.
I believe the registration display is controlled from the aircraft.cfg file. Try inserting: atc_id_enable=0 above the atc_id= line in the relevant [fltsim.xx] section of the .cfg file.
As a temporary measure, you can also switch off the registration by unticking the "show aircraft id" box in the callsign change bit of the aircraft select menu.
briwith wrote:I believe the registration display is controlled from the aircraft.cfg file. Try inserting: atc_id_enable=0 above the atc_id= line in the relevant [fltsim.xx] section of the .cfg file.
Thanks Brian that took care of it. I am going to have to figure out what to do about the tail, I can leave it as is and it will look correct on the left side but backwards on the right. Or I could remove the airlines initials and just have the stripes across the tail. Incorrect but its the same on both sides. I will probably leave the initials and take the flak.
Last edited by blanston12 on 04 Jul 2006, 17:54, edited 1 time in total.