I've just installed the updated version of this aircraft to P3Dv5 for which it is supposed now to be compatible. When I load it into the sim it loads OK and runs for about 10 seconds then the whole aircraft and flight deck goes black as does a lot of the outside scenery I've tried uninstalling then reloading it - no effect, tried the same release in FSX - works fine. I've checked through the folder structure for the aircraft and it all looks good but something is amiss!
Any ideas what might be happening?
Andy
JustFlight F27 v2.02
Moderators: Guru's, The Ministry
JustFlight F27 v2.02
AMD Ryzen 5 3600 6 core 4.2GHz
AsusTeK Prime B450M-A Motherboard
16GB (2x8GB) DDR4 1600MHz RAM
Nvidia GeForce RTX 2060 Super 4Gb
3x 250Gb SSD + 1x 1Tb HDD
AsusTeK Prime B450M-A Motherboard
16GB (2x8GB) DDR4 1600MHz RAM
Nvidia GeForce RTX 2060 Super 4Gb
3x 250Gb SSD + 1x 1Tb HDD
Re: JustFlight F27 v2.02
I only just saw this, sorry for being so late!
I've had V2.02 running in P3DV5.2 for a while, and haven't experienced any problems. The only time I've had the display go all black on me was in heavy rain situations with "Dynamic Lighting" turned all the way up - it seems P3D doesn't like that combination. Any chance it was raining when you tried the F27 ?
If that's the case, just turn down or off the Dynamic Lighting on the "lighting" configurations...
Mark
I've had V2.02 running in P3DV5.2 for a while, and haven't experienced any problems. The only time I've had the display go all black on me was in heavy rain situations with "Dynamic Lighting" turned all the way up - it seems P3D doesn't like that combination. Any chance it was raining when you tried the F27 ?
If that's the case, just turn down or off the Dynamic Lighting on the "lighting" configurations...
Mark
Re: JustFlight F27 v2.02
Hi Mark,
It's a weird one this. I do have dynamic lighting switched on but all failures have occurred with summer time clear weather, I haven't tried any more demanding conditions. Oddly enough though if I start Windows10 and launch the sim then select the F27 it works fine, even for a flight. Any other time when the op system has been up for a few minutes it crashes to black shadows. I have reported it to Justflight and they are baffled.
Andy
It's a weird one this. I do have dynamic lighting switched on but all failures have occurred with summer time clear weather, I haven't tried any more demanding conditions. Oddly enough though if I start Windows10 and launch the sim then select the F27 it works fine, even for a flight. Any other time when the op system has been up for a few minutes it crashes to black shadows. I have reported it to Justflight and they are baffled.
Andy
AMD Ryzen 5 3600 6 core 4.2GHz
AsusTeK Prime B450M-A Motherboard
16GB (2x8GB) DDR4 1600MHz RAM
Nvidia GeForce RTX 2060 Super 4Gb
3x 250Gb SSD + 1x 1Tb HDD
AsusTeK Prime B450M-A Motherboard
16GB (2x8GB) DDR4 1600MHz RAM
Nvidia GeForce RTX 2060 Super 4Gb
3x 250Gb SSD + 1x 1Tb HDD
Re: JustFlight F27 v2.02
Have you tried the old stand-by of deleting your shaders cache and seeing if the problem clears (!) up ?
Re: JustFlight F27 v2.02
No, I haven't tried that. What I have discovered is that there is a folder in each F27 aircraft folder called FOKKER_F27_CHECK_files which if renamed seems to sort the problem. I have reported this yesterday to Justflight and wait to see if they make any comment.
Andy
Andy
AMD Ryzen 5 3600 6 core 4.2GHz
AsusTeK Prime B450M-A Motherboard
16GB (2x8GB) DDR4 1600MHz RAM
Nvidia GeForce RTX 2060 Super 4Gb
3x 250Gb SSD + 1x 1Tb HDD
AsusTeK Prime B450M-A Motherboard
16GB (2x8GB) DDR4 1600MHz RAM
Nvidia GeForce RTX 2060 Super 4Gb
3x 250Gb SSD + 1x 1Tb HDD
Re: JustFlight F27 v2.02
Update.
Having failed to get a stable session with the F27 and others I searched the internet to find that others had hit similar problems with other aircraft since installing the hotfix for V5.2. Looking on LM's site there is a minor update to V5.2 (5.2.22.27615) which I downloaded. I just updated the client and hey presto, the problem has gone away! I've run several flights with a variety of aircraft and have not encountered any problems with blacked out panels and scenery.
Andy
Having failed to get a stable session with the F27 and others I searched the internet to find that others had hit similar problems with other aircraft since installing the hotfix for V5.2. Looking on LM's site there is a minor update to V5.2 (5.2.22.27615) which I downloaded. I just updated the client and hey presto, the problem has gone away! I've run several flights with a variety of aircraft and have not encountered any problems with blacked out panels and scenery.
Andy
AMD Ryzen 5 3600 6 core 4.2GHz
AsusTeK Prime B450M-A Motherboard
16GB (2x8GB) DDR4 1600MHz RAM
Nvidia GeForce RTX 2060 Super 4Gb
3x 250Gb SSD + 1x 1Tb HDD
AsusTeK Prime B450M-A Motherboard
16GB (2x8GB) DDR4 1600MHz RAM
Nvidia GeForce RTX 2060 Super 4Gb
3x 250Gb SSD + 1x 1Tb HDD