GLOSTER GLADIATORS BETA
Moderators: Guru's, The Ministry
Re: GLOSTER GLADIATORS BETA
Works OK in P3Dv4 thanks.
Simon
![Image](http://www.fsairlines.net/signatures/CBF118.png)
'The trouble with the speed of light is it gets here too early in the morning!' Alfred. E. Neuman
![Image](http://www.fsairlines.net/signatures/CBF118.png)
'The trouble with the speed of light is it gets here too early in the morning!' Alfred. E. Neuman
Re: GLOSTER GLADIATORS BETA
Yes she works well in P3dv4
But having the same ground handling problems as Joe. Differential toe braking only works slightly The best I can achieve is several hundred yards radius
Can't find this tail wheel radius thingy
Edit: Ok I found it. 8th parameter, point 0 Works even better now
Dale
![thumbs Up :thumbsup:](./images/smilies/023.gif)
![Laughing :lol:](./images/smilies/lol.gif)
Edit: Ok I found it. 8th parameter, point 0 Works even better now
![thumbs Up :thumbsup:](./images/smilies/023.gif)
Dale
![Image](http://www.fsairlines.net/signatures/48851.png)
![Image](https://www.cbfsim.co.uk/cbfsim/g-cbfs/sig/Dale_Moore_Card.jpg)
![Image](https://www.cbfsim.co.uk/cbfsim/g-cbfs/Images/Dale_Moore_Shield.png)
- blanston12
- Vintage Pair
- Posts: 2799
- Joined: 28 Jun 2004, 20:45
- Location: San Francsico, California
Re: GLOSTER GLADIATORS BETA
Hey Dave, any updates on your V4 gladiator?
Joe Cusick,
![Image](http://www.fsairlines.net/signatures/CBF110.png)
I am serious, and don't call me Shirley.
![Image](http://www.fsairlines.net/signatures/CBF110.png)
I am serious, and don't call me Shirley.
- DaveG
- The Gurus
- Posts: 7818
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: GLOSTER GLADIATORS BETA
Sorry Joe, real life has got in the way recently, so not had much time for FS stuff.
Dave G.
- blanston12
- Vintage Pair
- Posts: 2799
- Joined: 28 Jun 2004, 20:45
- Location: San Francsico, California
Re: GLOSTER GLADIATORS BETA
No problem Dave, not trying to rush you, just curious.
Joe Cusick,
![Image](http://www.fsairlines.net/signatures/CBF110.png)
I am serious, and don't call me Shirley.
![Image](http://www.fsairlines.net/signatures/CBF110.png)
I am serious, and don't call me Shirley.
-
- Vintage Pair
- Posts: 2580
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: GLOSTER GLADIATORS BETA
Only just read this ! , try giving a blast of throttle as well as full rudder & toe brake - Tiger Moth technique with tail skid on grass (less the toe brake bit)!Vc Ten wrote: ↑14 Jan 2019, 17:40Yes she works well in P3dv4But having the same ground handling problems as Joe. Differential toe braking only works slightly The best I can achieve is several hundred yards radius
Can't find this tail wheel radius thingy
Edit: Ok I found it. 8th parameter, point 0 Works even better now![]()
Dale
Keith
- DaveG
- The Gurus
- Posts: 7818
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: GLOSTER GLADIATORS BETA
I've altered the tail wheel angle and added a differential brake entry to the aircraft.cfg. Works fine now.
Also added the gunsight reticule to the VC as well as basic TacPack functionality.
Fixed the electrical problem with the radio & GPS and added a [radios] section so the ATC will work. ( Needed for P3d)
I'll upload the revised packaged later.
Also added the gunsight reticule to the VC as well as basic TacPack functionality.
Fixed the electrical problem with the radio & GPS and added a [radios] section so the ATC will work. ( Needed for P3d)
I'll upload the revised packaged later.
Dave G.
- DaveG
- The Gurus
- Posts: 7818
- Joined: 23 Jun 2004, 18:05
- Location: in a deep, dark hole somewhere.
- Contact:
Re: GLOSTER GLADIATORS BETA
I've just uploaded an updated version of the conversion, with the corrections/enhancements mentioned in my previous post.
https://daveg.cbfsim.org/files/Gloster_ ... or_P3d.zip
https://daveg.cbfsim.org/files/Gloster_ ... or_P3d.zip
Dave G.
- blanston12
- Vintage Pair
- Posts: 2799
- Joined: 28 Jun 2004, 20:45
- Location: San Francsico, California
Re: GLOSTER GLADIATORS BETA
Great news! Will test it out as soon as I can but probably wont have time for a couple of days.DaveG wrote: ↑29 Jan 2019, 19:31I've just uploaded an updated version of the conversion, with the corrections/enhancements mentioned in my previous post.
https://daveg.cbfsim.org/files/Gloster_ ... or_P3d.zip
Joe Cusick,
![Image](http://www.fsairlines.net/signatures/CBF110.png)
I am serious, and don't call me Shirley.
![Image](http://www.fsairlines.net/signatures/CBF110.png)
I am serious, and don't call me Shirley.