A New Bulldog...

If you have a payware prog whether it be a model, scenery or utility that you have tried.. tell us about it here.

Moderators: Guru's, The Ministry

Flying_Junk
Chipmunk
Chipmunk
Posts: 18
Joined: 17 Oct 2007, 13:04

A New Bulldog...

Post by Flying_Junk »

..or at the very least an updated one...

http://www.blackboxsimulation.com/index ... a-bulldog/

User avatar
DaveB
The Ministry
Posts: 30457
Joined: 17 Jun 2004, 20:46
Location: Pelsall, West Mids, UK
Contact:

Re: A New Bulldog...

Post by DaveB »

Thanks for the HU FJ :thumbsup:

Saw this highlighted at SoH. The Screenies don't look bad. All the round bits are round which is always a good sign. Didn't realise that Blackbox was none other than Graham Waterfield of PSS fame!
ATB
DaveB B)smk
ImageImage
Old sailors never die.. they just smell that way!

User avatar
Airspeed
Red Arrows
Red Arrows
Posts: 9755
Joined: 14 Sep 2011, 03:46
Location: Central Victorian Highlands, Dja Dja Wurrung Country, Australia
Contact:

Re: A New Bulldog...

Post by Airspeed »

Thanks Mr J,
Looks about my size. ;)

emfrat
Concorde
Concorde
Posts: 938
Joined: 09 Jul 2008, 07:09
Location: 50 DME West of Brisbane, Ugarapul and Kitabul country in Sunny Qld

Re: A New Bulldog...

Post by emfrat »

Airspeed wrote:Thanks Mr J,
Looks about my size. ;)
Mike, if you value your sanity, stay away from this. I just wasted AUD23 and 2 hrs of my time trying to install what I paid for.
The installer is a shambles. It tries to install stuff for a whole range of Airbus models, which I did not ask for and do not want. If you press 'Ignore' and keep pressing it, you finally see a Bulldog file - but like the rest, it throws a decompression error, and the only option then is to abort the install. That means the Preflight Manager will not work, so you cannot activate your purchase.. The absence of those archive files also affects the uninstaller, so even though it said it had been succesful, there were Blackbox folders remaining in several places and I had to remove them manually. Haven't looked at the Registry yet, to see what damage it has done there.

As far as I'm concerned, the product as supplied is unfit for use, so I will want a refund ASAP. Pity I can't recover the bandwidth wasted on downloading it.

Take care
MikeW

User avatar
Airspeed
Red Arrows
Red Arrows
Posts: 9755
Joined: 14 Sep 2011, 03:46
Location: Central Victorian Highlands, Dja Dja Wurrung Country, Australia
Contact:

Re: A New Bulldog...

Post by Airspeed »

Thank you very much, Mike.
Sorry you've had such trouble.
Hope that you get your refund.
Incredible that commercial sellers can't get it right. :|

btw, as I'm going to Airshows Downunder in a couple of days, are there any particular photos that I could help with?
(I'm only a very average photographer, but there may be some detail of interest to you)

Dev One
Vintage Pair
Vintage Pair
Posts: 2591
Joined: 10 Jul 2009, 08:33
Location: Chacombe about 2 mile east of M40 J11

Re: A New Bulldog...

Post by Dev One »

Airspeed wrote: btw, as I'm going to Airshows Downunder in a couple of days, are there any particular photos that I could help with?
(I'm only a very average photographer, but there may be some detail of interest to you)
Mike if any of the early Percival Gulls appear.......Cockpit shots would be very welcome......next project as a follow on from the Hendy.....
keith

[edit] especially if VH-UTP is there!!!
Last edited by Dev One on 01 Mar 2017, 20:40, edited 1 time in total.

User avatar
DaveB
The Ministry
Posts: 30457
Joined: 17 Jun 2004, 20:46
Location: Pelsall, West Mids, UK
Contact:

Re: A New Bulldog...

Post by DaveB »

MikeW..

Someone at SoH reported problems with installation and it was attributed to his AV (MSE). GW responded almost immediately with a new link and instructions and the install went ok. The user hasn't reported back with his impressions but at least the install routine was sorted.
ATB
DaveB B)smk
ImageImage
Old sailors never die.. they just smell that way!

Flying_Junk
Chipmunk
Chipmunk
Posts: 18
Joined: 17 Oct 2007, 13:04

Re: A New Bulldog...

Post by Flying_Junk »

DaveB wrote:MikeW..

Someone at SoH reported problems with installation and it was attributed to his AV (MSE). GW responded almost immediately with a new link and instructions and the install went ok. The user hasn't reported back with his impressions but at least the install routine was sorted.
ATB
DaveB B)smk
Sorry, that was me. GW sent me a link to download the BlackBox Preflight Manager separately, which worked perfectly - I didn't find it much more hassle than activating a RealAir or Flight 1 release. I also tried his suggestion of adding the installer.exe to the exceptions in MS Essentials and found that the decompression worked perfectly. Since then all customers have received activation instructions, with an apology for all the confusion. I am quite enjoying it so far, a nice stablemate for Rob Richardson's Pup - I'm not saying the hassle was OK, just resolved to my satisfaction.

User avatar
DaveB
The Ministry
Posts: 30457
Joined: 17 Jun 2004, 20:46
Location: Pelsall, West Mids, UK
Contact:

Re: A New Bulldog...

Post by DaveB »

Thanks for that FJ :thumbsup:

ATB
DaveB B)smk
ImageImage
Old sailors never die.. they just smell that way!

User avatar
spatialpro
Concorde
Concorde
Posts: 681
Joined: 10 Apr 2007, 20:18
Location: Wessex

Re: A New Bulldog...

Post by spatialpro »

Ah ha, an aircraft I have RW flying experience in... RAF elementary flying training in fact, courtesy of a UAS... :fly: I may end up caving and buying this one. The screenshots look great, but the 2/5 from 21 reviews doesn't and neither do the reports of install issues...
Image

Formerly "Airtrooper"

i9-10900KF, 64Gb RAM,
RTX 3090, Quest Pro, Win10 Pro 64-bit
Saitek Combat Rudder Pedals, Saitek X52 Pro

Post Reply