
A2A's civilian Mustang MkIV
Moderators: Guru's, The Ministry
A2A's civilian Mustang MkIV
After a series of rather disappointing purchases from other add-on aircraft manufacturers, I decided to cheer myself up with something I could rely on - i.e. something from A2A. And here she is, my first single-engine Accu-Sim warbird. I'm still learning all about her, but I'm hugely impressed already. By the way I'm never sure whether I should be posting pictures of non-British aircraft in this gallery, so I've called it a MkIV and put an RAF paint on it. Hopefully, nobody will notice.


- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: A2A's civilian Mustang MkIV
Hi Paul
That's a very nice looking model/paint
As large swathes of P51 production was made specifically for the RAF, this lady has no problem making an appearance
Lewis tells me you can switch Accu-Sim off (or that the models default to Accu-Sim off).. something I should really look into as it often stops my flying the P47. RTFM again me thinks
As it happens, I recently threw a new Snafu paint on it and managed a short flight without it blowing up
I have the WWII Fighters Mustang (updated to FSX native spec) which I fly every now and again but paints are limited.. they're either pre-FSX conversion or WoP3 and the maps are different. Considering Warbirdsim at the mo
ATB
DaveB

That's a very nice looking model/paint




I have the WWII Fighters Mustang (updated to FSX native spec) which I fly every now and again but paints are limited.. they're either pre-FSX conversion or WoP3 and the maps are different. Considering Warbirdsim at the mo

ATB
DaveB



Old sailors never die.. they just smell that way!
- Tako_Kichi
- Concorde
- Posts: 1615
- Joined: 12 Oct 2007, 19:39
- Location: SW Ontario, Canada (ex-pat Brit)
Re: A2A's civilian Mustang MkIV
I did a few Commonwealth paints for the A2A WoPII/WWII Fighters FSX update version Dave 'cus I was sick of looking at US paints all the time. I did 112 Sqn RAF (the 'Sharkmouth' squadron), 234 Sqn RAF, 442 Sqn RCAF (3 paints, 1 camo, 2 bare metal), 3 Sqn RAAF and even one in the Luftwaffe green/yellow evaluation paint they used when testing captured aircraft.
They can be found here: http://www.sim-outhouse.com/sohforums/l ... 0&keyid=86
They can be found here: http://www.sim-outhouse.com/sohforums/l ... 0&keyid=86
Larry
Re: A2A's civilian Mustang MkIV
DaveB wrote: Lewis tells me you can switch Accu-Sim off (or that the models default to Accu-Sim off).. something I should really look into as it often stops my flying the P47. RTFM again me thinksAs it happens, I recently threw a new Snafu paint on it and managed a short flight without it blowing up
![]()
I have the WWII Fighters Mustang (updated to FSX native spec) which I fly every now and again but paints are limited.. they're either pre-FSX conversion or WoP3 and the maps are different. Considering Warbirdsim at the mo![]()
I don't know about the P-47, but in the Mini Controls panel of this Mustang, you can turn damage on or off, which I assume equates to enabling or disabling Accusim. In the Stratocruiser, there is a definite option. I've had to wind down the sim realism settings for the Mustang because I can't cope with the swing on take off, and I'm not sure if that affects Accusim at all. Its a cracking model though, particularly with the modern autopilot, radios and GPS fitted. Not only that, but with a one-line edit of their respective aircraft.cfg entries, repaints for the military model can be used on the civilian one.
I hope you don't mind, but I had to post a picture of this repaint by the highly esteemed Jan Kees Blom - Elizabeth Jane just happens to be the name of my elder daughter. I might send her the link to this thread...she'll be thrilled.


Larry, do those repaints work with the WoP3 Mustang, the current Accusim one ?Tako_Kichi wrote:I did a few Commonwealth paints for the A2A WoPII/WWII Fighters FSX update version Dave 'cus I was sick of looking at US paints all the time. I did 112 Sqn RAF (the 'Sharkmouth' squadron), 234 Sqn RAF, 442 Sqn RCAF (3 paints, 1 camo, 2 bare metal), 3 Sqn RAAF and even one in the Luftwaffe green/yellow evaluation paint they used when testing captured aircraft.
They can be found here: http://www.sim-outhouse.com/sohforums/l ... 0&keyid=86
- Tako_Kichi
- Concorde
- Posts: 1615
- Joined: 12 Oct 2007, 19:39
- Location: SW Ontario, Canada (ex-pat Brit)
Re: A2A's civilian Mustang MkIV
To be perfectly honest Paul I can't remember as I did them so long ago. I have a feeling that the WoP3 version was a totally re-built model so the texture mapping would be different. The only way to know for sure would be to download one and compare the texture sheets to see if:Paul K wrote:Larry, do those repaints work with the WoP3 Mustang, the current Accusim one ?
1. They had the same file names.
OR
2. The parts were in the same places on the texture sheet.
If 2 it might be possible to make them work by renaming the file to match the WoP3 naming system.
I don't think I have the WoP3 P51 on this install of FSX but it may be on my old computer (which hasn't been started up in years) so I can't easily check.
Larry
Re: A2A's civilian Mustang MkIV
Yep Larry, I think the WoP 3 Mustang is a new model altogether. I'd certainly like to see some RAF repaints for it. 

- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: A2A's civilian Mustang MkIV
Larry..
Thanks for that. I already have your Commonwealth paints for it
As I said earlier.. choosing paints for the 'in-between' Mustang is a minefield. I've pulled so many down that are either pre-update or for the WoP3 model, I gave up in the end. Yours were/are for the in-betweener and work a treat
Paul.. I've dug the rubbish out for my P47 and find its NOT the Accu-Sim model after all. Dim-wit!
No wonder I couldn't turn AS off
I've not done a proper install for it in ages.. just dragged all I could find from one build to the next and undoubtedly.. bits have gone along the way. It may be better to remove what I have and start anew
EDIT:

ATB
DaveB
Thanks for that. I already have your Commonwealth paints for it


Paul.. I've dug the rubbish out for my P47 and find its NOT the Accu-Sim model after all. Dim-wit!



EDIT:


ATB
DaveB



Old sailors never die.. they just smell that way!
Re: A2A's civilian Mustang MkIV
Dave, is it the current WoP3 Thunderbolt that you have, but without the Accusim module ?
Like those Mustang repaints by the way.
Like those Mustang repaints by the way.

- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: A2A's civilian Mustang MkIV
Hello Mate
Yes it is
I could always get the Accu-Sim module for it but life is complex enough without adding to it
I've since dragged all the bits out and installed it properly from the exe
I've always thought what a butch looking aircraft it is and couldn't resist getting it. However.. expectations can be dashed (as we both know from recent experiences) and a consequence is I like to look at it more than I like to fly it. I have the same 'problem' with a number of models so the P47 is far from unique
I've jumped on the Warbirdsim boat btw
ATB
DaveB

Yes it is




I've jumped on the Warbirdsim boat btw

ATB
DaveB



Old sailors never die.. they just smell that way!
Re: A2A's civilian Mustang MkIV
I’m a big fan of the A2A WoP 2 P51 FS9 version with patch for FSX. I fly it more than anything and it’s got a brilliant flight model, it really feels as though it’s balanced on knife edge especially on climb out, so unlike the “arcade” type flight models of so many FS aircraft. Dare I say it almost feels like you’re flying a real aeroplane!
I have a large number of repaints... try these sites.
http://aussiex.org/forum/index.php?/fil ... =50&st=150
http://www.simulatedcreations.com/simul ... p2_51.html
I also have the Warbirdsim P51B and Little friends (both bought when on special). They’re good, but for me don’t match the A2A version.
I really should buy the WoP3 version!
I have a large number of repaints... try these sites.
http://aussiex.org/forum/index.php?/fil ... =50&st=150
http://www.simulatedcreations.com/simul ... p2_51.html
I also have the Warbirdsim P51B and Little friends (both bought when on special). They’re good, but for me don’t match the A2A version.
I really should buy the WoP3 version!
Thanks
Colin Bear
Colin Bear