HS 748 cockpit issue.

[cvenom]

Greetings
After installing the twenty tonne dog whistle, sorry HS748 for FSX I've been unable to get the inverters and alternators to come on line.
I uninstalled the aircraft and reloaded both it and the panel from this site thinking I had the older dogy version fitted but still no joy.
The installation instructions were followed (for a change) and I've had a look at the owners manual.
Other than I'm missing something is there a glitch or such?
Thank you.

[DaveB]

Hi cvenom

I think this is down to a legacy issue. If you go into the 2D panel.. all the things that apparently don't work will work once they've been switched from here

ATB
DaveB

[Viscount Cornbank]

On the latest version one shouldn't have to do that as the processing is in the VC section of the panel cfg. The inverters are on by default, can't remember if the alternator switches have to be momentarily held to start or not.

Cheers

Fraser

[cvenom]

Thanks for the advice Gents.
The issue I'm having is the invertors wont come on line at all. They are indeed on by default but there is no output, ie nothing
showing on the meter and none of the radios autopilot etc has power.
The transfer switches are in the correct position as well.