vc810 v6 panel

[wjke]

Hallo,

I have a guestion about the viscount 810 v6 panel.
There should be a ILS control panel installed but i can not find it.
The location according the manual is in the centre of the coaming panel !!!

But where is the coaming panel.

hope you can help.

rgds Willem

[TSR2]

Hi Willem and welcome.

I can find it on the 836 version, the coaming panel is the panel immediately below the main windscreen. So as an example, if you start with the Vickers Viscount 810 V836 you will see it on the main panel below the central windscreen. I can't see that same switch on the other 810's though. On the other 810's the switch should be on the overhead radio panel. I haven't been able to check this thoroughly as I'm working at the moment. Hope this is of some help.

[wjke]

Hallo Ben,

Thanks and thanks for the reply.

The trick was the 836 version you mentioned.
I accidently installed the 800 version and reading the manual where the ILS control panel is also explaned in but could not find it on the 800 panel !!!.

I installed the 810 version now and the ILS panel is very easy to find. (of course )

thanks for the help.

rgds Willem,