Flying the flag...

[DaveB]

You're very welcome Sir

That's a mighty impressive AI lineup you have at both airports mate.. worth the effort you put into it I fear my pc wouldn't take too kindly to that volume.. not FSX anyway I have to shy away from major areas like those although I've not run out of memory since changing my autogen from V/Dense to Dense

ATB
DaveB

[speedbird591]

I wouldn't normally have that much AI if I was proper flying I turned the LHR stuff up to max to get plenty of moving traffic for my inspection but I think I've also got the static option enabled as well - I must check that

LHR in that shot was only giving about 12 fps but if I drop it to 40% I get around 20 fps with the CS 732. Anchorage is much easier on the frame rates and has far less traffic too so I can run max AI without any drama.

Did you notice my cheeky request on the last post for your shockwave light config for the 206? I would be even more beholden to you if you have it handy?

Ian

[DaveB]

Hello Mate

No, sorry.. I missed it. Not only do I read things that aren't there, I don't read things that ARE there

Here's the lighting section for the 206 as inserted by those good folk at Shockwave/A2A

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0 = 3, -14.40, -2.80, 1.25, fx_shockwave_navred ,
light.1 = 3, -14.40, 2.80, 1.25, fx_shockwave_navgre ,
light.2 = 3, -23.10, 0.00, 1.75, fx_shockwave_navwhi ,
light.3 = 1, -22.5, 0.6, 5.54, fx_shockwave_beaconh ,
light.4 = 2, -6.00, 0.00, 3.78, fx_shockwave_strobe_nl ,
light.5 = 4, 3.60, 0.00, 0.15, fx_shockwave_vclight ,
light.6 = 5, 7.2, 0.0, -1.5, fx_Shockwave_landing_light // Shockwave light

ATB
DaveB

[speedbird591]

Thanks, Dave. That finishes it off nicely



Ian

[DaveB]

Excellent

ATB
Dave

[petermcleland]

Yes there are quite a few statics there Ian...They are the ones without shadows

[DaveB]

I did wonder about the models without shadows Good spot Peter

ATB
DaveB

[speedbird591]

Well, I never knew that! I thought it was just vampires that didn't cast a shadow

Thanks, Peter. I'd better run the setup program and tidy the place up a bit.

Ian