


Yes indeed.. the wife's words ring loud in my ears.. Ok, you can have the Champ as long as this isn't the start of something bigger

I know what you mean about that 4th channel. I've tried using the rudder on the SCub and I guess, if you wanted to do something completely off the wall, then rudder input may help but I fly it just fine with the ailerons. If I had a default SCub.. I'd HAVE to use the rudder as it doesn't come with ailerons but as I don't.. I won't



BTW, I forgot to add earlier that I'd looked on ebay for Wildcat bits and there are only few. I looked again just and the items come to about 4 or 5 and most are from the U.S.. engine mounts and the like


I've still not managed to get the spinner cone fitted to the P51. The amount of force needed to get it to clip over the lip on the back plate is inordinate to what should be required. I don't believe the first one I fitted (the one that came with the model.. the back plate was sh@gged) clipped on dead easy. OK, it also flew off after 15 or 20 seconds so I guess there's method in their madness. The spinner cone I have left is the replacement I got and the back plate is part of the same pack but it just won't go on. Try not to break one mate. Cheap they are.. impossible to fit they also are


While looking through ebay for Wildcat bits, I noticed a-n-other Parkzone ZX10 txer.. completely different to the one I have. Darned odd because the one I have is the one they advertise with the model


ATB
DaveB
