Shiny New Paint Job-HD...

The Crewroom for non-FS related stuff, fun and general chat.

Moderators: Guru's, The Ministry

Post Reply
User avatar
petermcleland
Red Arrows
Red Arrows
Posts: 5201
Joined: 25 Jul 2004, 10:28
Location: Dartmouth, Devon
Contact:

Shiny New Paint Job-HD...

Post by petermcleland »

I thought I would use this new paint for today's Aerocache.

http://youtu.be/1h0APO_ZjjY

This is an HD video so click the resolution up to 1080p and then click the "Full Screen" icon at bottom right. Thanks for looking :fly:

User avatar
Molyned
Concorde
Concorde
Posts: 710
Joined: 19 Mar 2008, 15:07
Location: Nottinghamshire UK

Re: Shiny New Paint Job-HD...

Post by Molyned »

Most enjoyable Peter - except when you were politely informed that you'd stalled :worried:
I trust such 'helpful hints' can be turned off.
Cheers
Dave M(oly)

User avatar
petermcleland
Red Arrows
Red Arrows
Posts: 5201
Joined: 25 Jul 2004, 10:28
Location: Dartmouth, Devon
Contact:

Re: Shiny New Paint Job-HD...

Post by petermcleland »

Molyned wrote:Most enjoyable Peter - except when you were politely informed that you'd stalled :worried:
I trust such 'helpful hints' can be turned off.
Dave, you can turn off the whole HUD display and that includes that visual stall warning...I normally fly with it off but turn it back on for seeking Aerocaches. There is also an aural stall warning and you could hear it just as I touched down on that video...I like to try to touchdown just at the stall. But of course if the stall comes at more than about a foot above the ground then the touchdown will be less than perfect.

The aerodynamics of this little amphibian are very good indeed and the aeroplane seems to do everything that I would expect at all stages of flight...I just love flying it :)

One other good point about the HUD is that to get any video or screenshots from a position outside the cockpit it has to be done by flying in that position...The HUD then becomes your only instrument as you wheel about the sky and it is very useful.

Post Reply