and then it all goes black!
Moderators: Guru's, The Ministry
and then it all goes black!
Once in a while (increasingly) My FS9 for no reason I can determine just goes to a black screen, with the sound of the last aircraft I was flying still continuing in the background, then after about 45 seconds I get a 'flightsim has quit message'. A bit vague I know, but any ideas?
John
John
never give up, never surrender


- Garry Russell
- The Ministry
- Posts: 27180
- Joined: 29 Jan 2005, 00:53
- Location: On the other side of the wall
Re: and then it all goes black!
Hi John
I have had FS.9 on Six HD's spread over three computers and I have had that on occasions on all of them.
Most of the occurances seem to be when switching views.
It would be inteseting to know if it is a standard "one of those things"
Very occasionally when it does that, it will comeback but it usually quits then restarts itself.....annoying.
I have had FS.9 on Six HD's spread over three computers and I have had that on occasions on all of them.
Most of the occurances seem to be when switching views.
It would be inteseting to know if it is a standard "one of those things"
Very occasionally when it does that, it will comeback but it usually quits then restarts itself.....annoying.
Garry

"In the world of virtual reality things are not always what they seem."

"In the world of virtual reality things are not always what they seem."
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: and then it all goes black!
Is it giving an error John?? More often it will give the old cookie 'Flightsim has experienced a problem blah, blah'.. spit out an error, then restart unless you tell it not to. There are a number of things that can cause it and often, the error report isn't helpful (as is the case for most M$ errors)
ATB
DaveB
ATB
DaveB


Old sailors never die.. they just smell that way!
- Garry Russell
- The Ministry
- Posts: 27180
- Joined: 29 Jan 2005, 00:53
- Location: On the other side of the wall
Re: and then it all goes black!
HI Dave
When that particular happen to me there is no error...I do get the 'FS has a problem has to quit' in other instances.
As I mentioned it sometimes comes back an I've always had the impression it has run itself out of memory and is trying to empty buffers but usually falls over itself.
Maybe not
Because I don;t have a lot of ram I have put it doen to that being the reason I get it but not many others.
When that particular happen to me there is no error...I do get the 'FS has a problem has to quit' in other instances.
As I mentioned it sometimes comes back an I've always had the impression it has run itself out of memory and is trying to empty buffers but usually falls over itself.
Maybe not
Because I don;t have a lot of ram I have put it doen to that being the reason I get it but not many others.
Garry

"In the world of virtual reality things are not always what they seem."

"In the world of virtual reality things are not always what they seem."
- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: and then it all goes black!
Hmm.. this is a problem I've not seen
Whenever I've had a black screen.. the system has hung due to some FS error or other and it comes up (eventually) with the 'FS has wrapped it's hand in' screen. Without any error report, I'd not know what to suggest
ATB
DaveB
ATB
DaveB


Old sailors never die.. they just smell that way!
Re: and then it all goes black!
That's ok Dave, the more I look into it, the more I think it might be a scenery thing, it crashes over 'Pompey' but having just flown over 'Emma Field' it seems fine!DaveB wrote:Hmm.. this is a problem I've not seenWhenever I've had a black screen.. the system has hung due to some FS error or other and it comes up (eventually) with the 'FS has wrapped it's hand in' screen. Without any error report, I'd not know what to suggest
![]()
![]()
ATB
DaveB
Kind regards
John
never give up, never surrender


- DaveB
- The Ministry
- Posts: 30457
- Joined: 17 Jun 2004, 20:46
- Location: Pelsall, West Mids, UK
- Contact:
Re: and then it all goes black!
Hi John
Are you running with FSNav too or is it just the sim on it's own?
ATB
DaveB
Are you running with FSNav too or is it just the sim on it's own?
ATB
DaveB


Old sailors never die.. they just smell that way!
-
emfrat
- Concorde

- Posts: 938
- Joined: 09 Jul 2008, 07:09
- Location: 50 DME West of Brisbane, Ugarapul and Kitabul country in Sunny Qld
Re: and then it all goes black!
John -
I had almost identical symptoms in my VFR installation. It happened between Gloucestershire and Lyneham and was caused by a bgl conflict between two volumes of the VFGM scenery.
There will be something about it in the Visual Flight forum - I will have a look when I get home tonight.
ATB
MikeW
I had almost identical symptoms in my VFR installation. It happened between Gloucestershire and Lyneham and was caused by a bgl conflict between two volumes of the VFGM scenery.
There will be something about it in the Visual Flight forum - I will have a look when I get home tonight.
ATB
MikeW
Re: and then it all goes black!
Thanks for that, I'm sort of thinking it might be something like that.emfrat wrote:John -
I had almost identical symptoms in my VFR installation. It happened between Gloucestershire and Lyneham and was caused by a bgl conflict between two volumes of the VFGM scenery.
There will be something about it in the Visual Flight forum - I will have a look when I get home tonight.
ATB
MikeW
FSNav? No I'm not... I am but a simple soulDaveB wrote:Hi John![]()
Are you running with FSNav too or is it just the sim on it's own?
ATB
DaveB
KInd regards and thanks for the ideas chaps
never give up, never surrender


-
emfrat
- Concorde

- Posts: 938
- Joined: 09 Jul 2008, 07:09
- Location: 50 DME West of Brisbane, Ugarapul and Kitabul country in Sunny Qld
Re: and then it all goes black!
John -
I know I definitely posted on this subject, and it would have been in the VF forum, but I can't find it !
The VFGM photoscenery has some tile overlaps between volumes. In the case I am talking about, some autogen trees had been added to a VFGM P-S bgl for the 'central' area and because this same bgl also existed in the adjoining 'western' volume, a conflict occurred. The 'cause behind the cause' was that I had inadvertently re-introduced the conflict when I changed from the 4-volume setup to an All-in-one.
I know it's there somewhere - please bear with me
ATB
MikeW
I know I definitely posted on this subject, and it would have been in the VF forum, but I can't find it !
The VFGM photoscenery has some tile overlaps between volumes. In the case I am talking about, some autogen trees had been added to a VFGM P-S bgl for the 'central' area and because this same bgl also existed in the adjoining 'western' volume, a conflict occurred. The 'cause behind the cause' was that I had inadvertently re-introduced the conflict when I changed from the 4-volume setup to an All-in-one.
I know it's there somewhere - please bear with me
ATB
MikeW
