E Copy Touchscreen...?

The place for hardware and software issues, FS and non-FS related

Moderators: Guru's, The Ministry

User avatar
Techy111
Battle of Britain
Battle of Britain
Posts: 3319
Joined: 15 Aug 2007, 13:51
Location: Coming out of Retirement.

Re: E Copy Touchscreen...?

Post by Techy111 »

Yup...i got the driver for it...and saw it working on a mates...seperate screen of Win XP....one is a serial connector for the touchscreen and the other is for the graphic side of things.... :dunno:

Is it a white elephant mate...?

Tony
The last surviving and complete Vickers Vanguard....."Superb"
ImageImageImage

ianhind
Concorde
Concorde
Posts: 1935
Joined: 01 Aug 2005, 10:55
Location: Nottinghamshire

Re: E Copy Touchscreen...?

Post by ianhind »

According to that mp3car link, you need to have the extra specialgraphics card as well. If you have that, then there is no reason why you cannot run that as well as the PCI-E 8800. But only if you have the neccessary slot in you PC.

So what is the extra graphics card? AGP - not likely on your motherboard. PCI - you should have at least one of those on your motherboard.

Since you have seen it running, a different proposition to something off eBay!

Ian

User avatar
Techy111
Battle of Britain
Battle of Britain
Posts: 3319
Joined: 15 Aug 2007, 13:51
Location: Coming out of Retirement.

Re: E Copy Touchscreen...?

Post by Techy111 »

I got 4 PCI Graphics slots Ian....2 x PCI E and 2 x the older PCI.....would they be OK side by side...? and what about the serial port thingy so it recognises the touch screen side of things mate...?

I take it i need to see if i have a slot for that...?

Tony
The last surviving and complete Vickers Vanguard....."Superb"
ImageImageImage

ianhind
Concorde
Concorde
Posts: 1935
Joined: 01 Aug 2005, 10:55
Location: Nottinghamshire

Re: E Copy Touchscreen...?

Post by ianhind »

Tony

Just been to watch G-LNAA doing another rescue - piccies to follow but now to concentrate on your 10 incher.

What is your motherboard - you have probably said somewhere before, but to save me searching.... There may be a serial port at the back so no problem.

Have you a photo of the add in card for the screen - just want to check but if it is a PCI then that should be ok.

Ian

Edit: Found your previous e-mail detailing your motherboard (remember loading nForce drivers!). Anyway if you still have the ASUS P5K-E WiFi motherboard, bad news: "This board also doesn’t have parallel and serial ports, although one serial port is available thru an I/O bracket that doesn’t come with the product." So that's not much help unless your version did come with the bracket?

Instead you will either have to buy a serial card or a USB to serial converter eg
http://cgi.ebay.co.uk/USB-2-0-TO-RS232- ... 591wt_1002

These do work since my wife's PC has one installed to communicate with an old Palm Pilot - the driver installation was not obvious but got there in the end.

[img]http://www.hardwaresecrets.com/fullimag ... =8082{/img]

The PCI slots are the white one on the left and the two white ones together.

User avatar
Techy111
Battle of Britain
Battle of Britain
Posts: 3319
Joined: 15 Aug 2007, 13:51
Location: Coming out of Retirement.

Re: E Copy Touchscreen...?

Post by Techy111 »

Looking forward to those Photos Ian..... :thumbsup:

No ports.....but i am sure there is a way round it...?

What card do you recommend mate...?

Tony
The last surviving and complete Vickers Vanguard....."Superb"
ImageImageImage

Post Reply