Bristol 171 Sycamore in the works
Moderators: Guru's, The Ministry
- Rick Piper
- The Gurus
- Posts: 4766
- Joined: 18 Jun 2004, 17:20
- Location: In front of screen learning 3ds max :/ ...............Done it :)
Re: Bristol 171 Sycamore in the works
Hi Trev
FSX does utilise multi core Processors.
uses all 4 of my cores fine but only SP2 does this i think.
or have i missunderstood ?.
Rick
FSX does utilise multi core Processors.
uses all 4 of my cores fine but only SP2 does this i think.
or have i missunderstood ?.
Rick
- petermcleland
- Red Arrows
- Posts: 5201
- Joined: 25 Jul 2004, 10:28
- Location: Dartmouth, Devon
- Contact:
Re: Bristol 171 Sycamore in the works
Well, it is to do with the new team that took over FS developement...In the past they always left the F9 key for Helge's FSNav and it was obvious that the new team didn't even know about FSNav when they used the F9 key. The whole keyboard input was trampled on and basically broken without respect for previous versions' carefully thought out keyboard. Just reversing the direction of the S key movement in the views from SHIFT+S to go from 2D to spot and S to go back into 2D cockpit to vica-versa was sufficiently infuriating for me to quickly tire of FSX and the two monitor business that you mention was just written off right at the start. I would not be at all surprised if the "Aces" team gets many new, and loses many old members before FS11 comes out and everything is trampled over again. I'm afraid Helge will never write new code for FSNav so I'm very happy to still have his final FS9 version working for me so efficiently. I have also noticed that his code working speed has increased dramatically with Nvidia Driver progression and is very quick indeed with the drivers I use.tonymadge wrote: I hate MS for bringing out FSX with out making it work with FS9 add-ons like FSNAV and simple things like "go to previous flight" Yes they added lots of nice things and improved a lot, but its the basics that it lacks that frustrate me. Like not being able to use two monitors in full screen, also the wobbly effect in VC on outside textures..
Regards,
http://www.petermcleland.com/
Updated 28/8/2007
My Channel
http://www.youtube.com/user/petermcleland?feature=mhee
http://www.petermcleland.com/
Updated 28/8/2007
My Channel
http://www.youtube.com/user/petermcleland?feature=mhee
- petermcleland
- Red Arrows
- Posts: 5201
- Joined: 25 Jul 2004, 10:28
- Location: Dartmouth, Devon
- Contact:
Re: Bristol 171 Sycamore in the works
Thanks Rick...To be quite honest, your Sycamore is the only helicopter that I can fly with reasonable precision and as it is the only helicopter that I have flown in real life, I am very attached to it. I do have other helicopters in my system (some payware) but generally when I fly them and discover that I can't fly them as well as I fly yours, then I tend to leave them in the hangar.Rick Piper wrote:and no problem with the beta shots Peter.
Regards,
http://www.petermcleland.com/
Updated 28/8/2007
My Channel
http://www.youtube.com/user/petermcleland?feature=mhee
http://www.petermcleland.com/
Updated 28/8/2007
My Channel
http://www.youtube.com/user/petermcleland?feature=mhee
- Trev Clark
- The Ministry
- Posts: 2822
- Joined: 26 Jun 2004, 08:54
- Location: Runway 26 at RAF Tangmere....most Mondays!
Re: Bristol 171 Sycamore in the works
You are correct Rick, I upgraded in November 2006, at that time MS said it would be for single core chips, when it ran like an overstuffed elephant and everybody said why is it rubbish on my 'top of the range' multi core based PC' they re-wrote the engine coding (SP1 or SP2) to utilise what was becoming the 'standard' processor. It would have cost me 30 quid to go multicore at the time, now it will be about 100 for a whole new chip. The choice of MB might have been different too!FSX does utilise multi core Processors.
uses all 4 of my cores fine but only SP2 does this i think.
or have i missunderstood ?.
ATB Trev
-
- Vintage Pair
- Posts: 2082
- Joined: 28 Jun 2004, 14:49
- Location: middle earth next to the public toilet
- Contact:
Re: Bristol 171 Sycamore in the works
I run a single core as per my specs below and its fine for me
AMD Phenom II X4 BE 965 @ 3.80GHz
nVidia GTX 560 TI 448 Cores
-
- Chipmunk
- Posts: 12
- Joined: 27 Apr 2005, 04:20
- Location: Withcott Australia
Re: Bristol 171 Sycamore in the works
'Morning people; I will add my two bits to the 'Sycamore' project.
There is no way that I will ever be able to duplicate all the personal and important scenery in FSX that I have in FS9. The reasons are many and complicated so let's move on.
Most of my indulgent memories are based on the aircraft and situations I experienced during my time in the Australian Naval Fleet Air Arm and FSX cannot emulate these at the moment.
Anything is possible, given time but I probably do not have that much left. I have never understood why Rick gave things away for free when inferior products were sold. Mind you, I was not complaining --- just did not understand why.
Since I really do not have access to a productive FSX, I would have no hesitation in purchasing a Beta Sycamore for FS9.
Is there one available?
There is no way that I will ever be able to duplicate all the personal and important scenery in FSX that I have in FS9. The reasons are many and complicated so let's move on.
Most of my indulgent memories are based on the aircraft and situations I experienced during my time in the Australian Naval Fleet Air Arm and FSX cannot emulate these at the moment.
Anything is possible, given time but I probably do not have that much left. I have never understood why Rick gave things away for free when inferior products were sold. Mind you, I was not complaining --- just did not understand why.
Since I really do not have access to a productive FSX, I would have no hesitation in purchasing a Beta Sycamore for FS9.
Is there one available?
- Rick Piper
- The Gurus
- Posts: 4766
- Joined: 18 Jun 2004, 17:20
- Location: In front of screen learning 3ds max :/ ...............Done it :)
Re: Bristol 171 Sycamore in the works
Hi Guys
I have recently been workinbg on the Sycamore
currently waiting to find an intact HR.Mk14 that has not had 99% of it's interior removed like all the ones i have visited
not easy to finish an accurate VC when the real ones are just empty shells
this hopefully will be available from SkySim when i finish it.
FSX Full SP2a standard.
I know that makes me a lot of enemies but it's far too complex to build stuff for both sims and not end up with a compromise
with low functionality.
Rick
working winch system for rescues and load carrying
I have recently been workinbg on the Sycamore
currently waiting to find an intact HR.Mk14 that has not had 99% of it's interior removed like all the ones i have visited
not easy to finish an accurate VC when the real ones are just empty shells
this hopefully will be available from SkySim when i finish it.
FSX Full SP2a standard.
I know that makes me a lot of enemies but it's far too complex to build stuff for both sims and not end up with a compromise
with low functionality.
Rick
working winch system for rescues and load carrying
- Rick Piper
- The Gurus
- Posts: 4766
- Joined: 18 Jun 2004, 17:20
- Location: In front of screen learning 3ds max :/ ...............Done it :)
Re: Bristol 171 Sycamore in the works
more pics of current progress
- nazca_steve
- Concorde
- Posts: 787
- Joined: 18 Nov 2005, 17:38
- Location: South Orange County, California (ex-pat from Cambs.)
- Contact:
Re: Bristol 171 Sycamore in the works
That looks absolutely superb, Rick, from the model to the payloads and rescue activity.
Steven Beeny, repainter and modeller. New Canberra series for FS9 out now.
http://www.flyingstations.com