Heeeelllllppppppp!!!!
Moderators: Guru's, The Ministry
Heeeelllllppppppp!!!!
FS9, I get halfway through pre-start checklist (BAC 1-11) or even as far as start and push when without warning, it just disappears in an instant - gone....nothing.....nix...nil, just gone.
Anyone got any ideas?
Nigel C
Anyone got any ideas?
Nigel C
"Speed building both sides.....passing one hundred knots.....V1..rotate...oh sh*t..."
- Garry Russell
- The Ministry
- Posts: 27180
- Joined: 29 Jan 2005, 00:53
- Location: On the other side of the wall
Re: Heeeelllllppppppp!!!!
Nigel
Two first offs.......if you haven't already done these
Copy the FS9 CFG then remove it and left FS build a new one
Also are you comming in straight to the One-Eleven??..if you are try calling up a default aircraft first, then change to the One-Eleven....maybe try this on e first :think:
Garry
Two first offs.......if you haven't already done these
Copy the FS9 CFG then remove it and left FS build a new one
Also are you comming in straight to the One-Eleven??..if you are try calling up a default aircraft first, then change to the One-Eleven....maybe try this on e first :think:
Garry
Garry
"In the world of virtual reality things are not always what they seem."
"In the world of virtual reality things are not always what they seem."
Re: Heeeelllllppppppp!!!!
Many thanks. Will give it a try.
"Speed building both sides.....passing one hundred knots.....V1..rotate...oh sh*t..."
-
- Vintage Pair
- Posts: 2082
- Joined: 28 Jun 2004, 14:49
- Location: middle earth next to the public toilet
- Contact:
Re: Heeeelllllppppppp!!!!
Agree with Garry, try a different aircraft it may be a guage or something in the 1-11 its not happy with. If the same happens with another aircraft try adifferent airport it may be an AFCAD problem as well... lot of messing but worth a try
AMD Phenom II X4 BE 965 @ 3.80GHz
nVidia GTX 560 TI 448 Cores
Re: Heeeelllllppppppp!!!!
Do you mean FS vanishes? I had this problem and it was the gunk between my chip and heatsink breaking down. New blob fixed it. However, if your crash happens at the same point each time it's probably not that!
Re: Heeeelllllppppppp!!!!
I have just moved house and connected PC up last night and gave it a go.
Loaded default 737 at Seattle. Push/start and taxi to the hold for 34R ran fine. Hit the NAV/GPS switch when stationary at the hold and the moment I did............... Wham...gone! FS9 just disappears and leaves me staring at the desk top.
Thinking about removing the whole installation and starting again!
NC
Loaded default 737 at Seattle. Push/start and taxi to the hold for 34R ran fine. Hit the NAV/GPS switch when stationary at the hold and the moment I did............... Wham...gone! FS9 just disappears and leaves me staring at the desk top.
Thinking about removing the whole installation and starting again!
NC
"Speed building both sides.....passing one hundred knots.....V1..rotate...oh sh*t..."
Re: Heeeelllllppppppp!!!!
Before you reinstall everything, you might try another aircraft first and at an airport that is not very busy or scenery intensive. The default Cessna on a grass strip somwhere would be a good choice. If the same thing happens, you might fix the problem by reinstalling the fs9gps gauge from the install disks. The guage is on install disk 2 in MSGAME3.cab
You might reinstall all the gauges in the .cab file but if you have customized any of the default gauges, you probably won't want to overwrite those.
If you want to try that and need more instrucion as to how to do it, just let us know.
Another thing to check is the event viewer in windows to see if there are any notices related to FS9 crashing.
Nigelb²
You might reinstall all the gauges in the .cab file but if you have customized any of the default gauges, you probably won't want to overwrite those.
If you want to try that and need more instrucion as to how to do it, just let us know.
Another thing to check is the event viewer in windows to see if there are any notices related to FS9 crashing.
Nigelb²
- speedbird591
- Battle of Britain
- Posts: 4038
- Joined: 24 Jun 2004, 05:56
- Location: Wiltshire, UK
- Contact:
Re: Heeeelllllppppppp!!!!
Crikey! And I thought formatting the hard drive would be the last resort!NigelC wrote:I have just moved house and connected PC up last night and gave it a go.
Good luck with it, anyway, Nigel.
Ian
visit Speedbird 747.com
Re: Heeeelllllppppppp!!!!
Cheers mate!
I've been working away from home for about 6 months now, so I've only had the problem when I've had the odd chance to try on the weekends back home. Having now moved, I've got more chance to sort it out. Thinking about removing and reloading simply because over the years I've built up so much c**p, downloading a/c to try out - not liking them but not bothering to delete them etc.
Nige
I've been working away from home for about 6 months now, so I've only had the problem when I've had the odd chance to try on the weekends back home. Having now moved, I've got more chance to sort it out. Thinking about removing and reloading simply because over the years I've built up so much c**p, downloading a/c to try out - not liking them but not bothering to delete them etc.
Nige
"Speed building both sides.....passing one hundred knots.....V1..rotate...oh sh*t..."
Re: Heeeelllllppppppp!!!!
I've removed everything and re-installed and it still does it.What's the ultimate clean-up I can do.
Desperately
NigeC
Desperately
NigeC
"Speed building both sides.....passing one hundred knots.....V1..rotate...oh sh*t..."