Uiver To You....

If you have a payware prog whether it be a model, scenery or utility that you have tried.. tell us about it here.

Moderators: Guru's, The Ministry

User avatar
Trev Clark
The Ministry
Posts: 2822
Joined: 26 Jun 2004, 08:54
Location: Runway 26 at RAF Tangmere....most Mondays!

Re: Uiver To You....

Post by Trev Clark »

Flash sites (although I D/L the latest version) seem to be a problem. I find that if I refresh, I get the site for 2 seconds, with the links working. This may be enough to get to the purchase screen, but it might be risky to go ahead with purchase in case it goes halfway through!
ATB Trev

Ferror
Chipmunk
Chipmunk
Posts: 28
Joined: 16 Apr 2006, 16:48

Re: Uiver To You....

Post by Ferror »

Trev, can you get to this page? :

http://home.hccnet.nl/r.cappers/dc2/purchase.html

All you need to do is to download a file, the actual purchase goes through the Flight1 wrapper.

Hope this helps!

User avatar
DaveB
The Ministry
Posts: 30457
Joined: 17 Jun 2004, 20:46
Location: Pelsall, West Mids, UK
Contact:

Re: Uiver To You....

Post by DaveB »

Hi Ferror :)

Tks for that ;-) The AP isn't a problem.. even having one fitted where there was none before but as the latter is the case, I'd have expected it to hold alt.. rather than simulate the old hydraulic Sperry which was notoriously fickle in this area :lol: Does that make sense?? I'm not sure now I've typed it :think: Put another way.. were it to have an old Sperry unit, I'd expect it to wander a little but as it doesn't, I don't. That sounds a bit more blunt but probably makes more sense :lol:

It's nice to know that the high/hot low/cold performance is accurate and it's been particularly well done. I'm a little unsure about the amount of nose-down pitch you get on full flap but that said, I've not tried to trim it out either. The model doesn't descend as such.. just goes heavy nose-down. Users of the current freeware Airspeed Ambassador will be used to the runway disappearing beyond the upper window frame on full flap.. those that dare use full flap that is! :cpu:

I'm sure that Douglas fans will be in heaven. I'm simply not enough of a Douglas fan to see it in the same light though as I mentioned earlier, it's a great looking model. ;-)

ATB

DaveB :tab:
ImageImage
Old sailors never die.. they just smell that way!

User avatar
DispatchDragon
Battle of Britain
Battle of Britain
Posts: 4925
Joined: 23 Feb 2005, 01:18
Location: On the corner of walk and dont walk somewhere on US1
Contact:

Re: Uiver To You....

Post by DispatchDragon »

Rob,Ferror

My apologies if my attempt at humor about "autopilots" was misconstrued by some - having met gents who
flew both the two and three pre WW2 , I was 100% aware of who or what the "autopliot" was (The 21 years old
neophyte in the right seat) And that was why my comment about beating it around the head came up. Thanks
for the HU about the paints - Id prefer to continue my trip across the US in a TWA paint scheme (although I
will admit the CSA,Uiver and Swissair schemes are very nice). Im looking forward to getting to Winslow on my
little journey to try out the reason for the DC2s exsistence - Im also going to make the return journey to see how
it handles crossing Alburque's East slope to Clines Corner with a full load east bound :)

Dave - Don Douglas was the first two create the concept of similar cockpits (The Dc2 through DC7 are very similar
in layout and the Dc8/Dc9/MD80/Boeing717 cockpits are similar.....an idea the Boeing didnt cotton on to until
the advent of the 727/737 almost 30 years after the DC2/Dc3 and one that Im afraid the British aircraft industry
never subscribed to..It makes cockpit training and upgrading from type to type easier, more convenient and cheaper
for airlines. Funnily I find the Uiver DC2 cockpit more modern than the Dc3s but thats just me

The only thing about this model I find a little disconcerting is the sound set... and I will admit to NOT having
heard a DC2 in flight but the sound set seems a little "weak" for a pair of Wright Cyclones pounding out their
best.


Cheers

Leif
Image

User avatar
DaveB
The Ministry
Posts: 30457
Joined: 17 Jun 2004, 20:46
Location: Pelsall, West Mids, UK
Contact:

Re: Uiver To You....

Post by DaveB »

Hi Leif,

Yes.. the similarity in 'offices' hadn't escaped me and I agree that the front end of the DC2 is rather more 'attractive' (for want of a better word) than the DC3. I'll leave it here hey as my dislike of the Douglas 'line' shouldn't be construed as it being wrong ;-)

ATB

DaveB :tab:
ImageImage
Old sailors never die.. they just smell that way!

User avatar
DispatchDragon
Battle of Britain
Battle of Britain
Posts: 4925
Joined: 23 Feb 2005, 01:18
Location: On the corner of walk and dont walk somewhere on US1
Contact:

Re: Uiver To You....

Post by DispatchDragon »

Horses for Courses Dave

I happen to like the total jumble of the Comets flight deck - sort of makes it "homey" - I suppose it goes back to the
old adage about American designers take an arm chair , put a pilot in it and then design the aircraft around that -
British designers build the ulitmate airframe them at the last minute punch a little hole in the pointy end for the
driver :)

:lol:

Leif - and now Ill let the thread get back to its natural course :roll: :roll:
Image

User avatar
Trev Clark
The Ministry
Posts: 2822
Joined: 26 Jun 2004, 08:54
Location: Runway 26 at RAF Tangmere....most Mondays!

Re: Uiver To You....

Post by Trev Clark »

Trev, can you get to this page? :
Alas, another 'black screen' and the word 'done' at the bottom of IE.
ATB Trev

robcap
Chipmunk
Chipmunk
Posts: 38
Joined: 12 Aug 2006, 22:11
Location: Jabeek, Netherlands
Contact:

Re: Uiver To You....

Post by robcap »

Hey Calypsos,

sorry mate.
I'm working on a HTML site. I hope that will solve the problem for the flash problem.
Will take a little while. So take a look on a few days.

Cheers, Rob
Image
No DC3 without the DC2
http://www.avsim.com/hangar/flight/dc2uiver/ for more interesting Douglas DC2 info

robcap
Chipmunk
Chipmunk
Posts: 38
Joined: 12 Aug 2006, 22:11
Location: Jabeek, Netherlands
Contact:

Re: Uiver To You....

Post by robcap »

@ Hinch,

Hi mate, just a quick heads up that payment through Paypal is now possible. You still need the Flight1 installer though.
More info in our support forum: here

Enjoy, best regards, Rob
Image
No DC3 without the DC2
http://www.avsim.com/hangar/flight/dc2uiver/ for more interesting Douglas DC2 info

robcap
Chipmunk
Chipmunk
Posts: 38
Joined: 12 Aug 2006, 22:11
Location: Jabeek, Netherlands
Contact:

Re: Uiver To You....

Post by robcap »

Hi all,

Tim uploaded his repaint templates here

Image
Image

So go and get them. Looking forward to YOUR liveries.

Cheers, Rob
Image
No DC3 without the DC2
http://www.avsim.com/hangar/flight/dc2uiver/ for more interesting Douglas DC2 info

Post Reply