Page 1 of 3
[BAC-1-11] Airspeed zet to zero
Posted: 03 Feb 2007, 21:37
by gevers1
I just noticed that sometimes the airspeed on the bac-1-11 gets set to zero in mid flight. This makes things somewhat tricky! Has anyone else seen this, and how to fix?
Not sure it's important but just in case: i fly using FSNavigator (only for route info, not for managing the autopilot) and Activesky for the weather. I fly 99% from the VC.
Thanks
/*Seb
Posted: 03 Feb 2007, 21:51
by gevers1
Hmm, the trick seems to be to force an overspeed, it makes the air speed register again (and then put the brakes on!!!)
Any idea why it's happening though?
Posted: 03 Feb 2007, 21:53
by MALTBY D
Not seen that & I've flown it a lot.
The thing that springs to mind straight away is pitot heat not being switched on.
Hope it's as simple as that.
DM
Posted: 03 Feb 2007, 21:54
by Garry Russell
Have you got the pitot heaters on.?
They could be icing up
Garry
Posted: 03 Feb 2007, 21:55
by DaveB
Hello matey..
Make sure you have your pitot heaters on. While this is no guarantee you won't see it happen again, you'll have done what you can to stop it
Btw.. they're on the OHP LH side.. 4 switches (though you only have to click one and the others follow suit)
ATB
DaveB :tab:
Posted: 03 Feb 2007, 21:56
by gevers1
I'm pretty sure i set the pitot's on: I'm currently flying from St Peterburg to Helsinki so it's pretty cold!
I'll keep an eye out next time it happens to see if it is the pitot heating!
Cheers
Posted: 03 Feb 2007, 21:56
by MALTBY D
Ha ha I got in first for once!
Posted: 03 Feb 2007, 21:56
by Garry Russell
Posted: 03 Feb 2007, 21:58
by MALTBY D
You're not flying the 1-11 510ED by any chance?
Any chance you fell victim to the upside down switches on the overhead & actually have pitot heat off instead of on?
Posted: 03 Feb 2007, 21:59
by DaveB
I don't believe that. No one had posted when I saw that and more to the point, there was no one indicated as browsing this forum :shock: :think:
SPOOKY
ATB
DaveB :tab:
