Page 1 of 1
Question for Fraser Re: HS 748 Panel
Posted: 11 Mar 2013, 19:54
by Nigel H-J
Fraser, if you are lurking around here can you advise whether the new panel you have done for the HS748 has been added to the model in the CBFS library download one?
Reason being is that I am unable to download the panel from your link in the New Releases and Support Thread, there is no fault with the down load link just that IT have blocked it

I can get to the Library through and hope that it may be available there as a complete download for the HS748.
Many thanks in advance
Nigel.
Re: Question for Fraser Re: HS 748 Panel
Posted: 11 Mar 2013, 20:41
by TSR2
Hi Nigel,
No its a separate download matey, but let me see what I can do...

Re: Question for Fraser Re: HS 748 Panel
Posted: 11 Mar 2013, 20:49
by Nigel H-J
Hi Ben
Many thanks
Nigel.
Re: Question for Fraser Re: HS 748 Panel
Posted: 11 Mar 2013, 21:36
by TSR2
Its in the library now mate. let me know if it works for you

Re: Question for Fraser Re: HS 748 Panel
Posted: 11 Mar 2013, 21:43
by Nigel H-J
Brilliant, thanks Ben.

Will try to download tonight but if not will definately be tomorrow. Will let you know how I get on.
Many thanks again
Regards
Nigel.
Re: Question for Fraser Re: HS 748 Panel
Posted: 12 Mar 2013, 16:25
by Tomliner
Am I correct in thinking that this panel will work in FS9?.Hope it's not a silly question.

EricT
EDIT.Just read the readme .txt file after downloading.Sorry,should've checked before posting.

Re: Question for Fraser Re: HS 748 Panel
Posted: 12 Mar 2013, 18:52
by TSR2
The FS9 version is down in Frasers thread in New Releases mate

Re: Question for Fraser Re: HS 748 Panel
Posted: 12 Mar 2013, 19:33
by Nigel H-J
Fantastic!!

many thanks Ben - works a treat and Fraser, if you call by very many thanks for producing brilliant panel just like flying a new aircraft now.
Kind regards
Nigel.
Re: Question for Fraser Re: HS 748 Panel
Posted: 15 Mar 2013, 11:14
by Tomliner
I'd just like to echo Nigel's comments re these new panels/sounds.I've printed the new manual so I now have some more learning to do! Many thanks again Fraser for your efforts.

EricT
Re: Question for Fraser Re: HS 748 Panel
Posted: 25 Mar 2013, 06:26
by Charlie Hotel
Just to add my appreciation for this wonderful panel. It has made me start flying my HS748 again which had spent too long languishing at the back of my hangar.
My favourite thing about this panel? The way the ground generator coughs into life after 3 attempts when you flick on the Ground Power switch...
Sheer genius !!
CH