Page 1 of 3
Ejector seat £50 so far on e-bay! And vampire bits!
Posted: 20 Feb 2011, 18:58
by John
http://cgi.ebay.co.uk/Ejector-Seat-in-n ... 500wt_1156
I thought, shall I shan't I? Realistically no I shan't :-(
Any idea what it's from?
If it stays around that money it's a bargain!
KInd regards
John
Just seen this, you've 45mins left!
http://cgi.ebay.co.uk/Havilland-Vampire ... 500wt_1156
Re: Ejector seat £50 so far on e-bay! And vampire bits!
Posted: 20 Feb 2011, 19:19
by DaveB
Don't do it John
Difficult to tell exactly what that came out of. The seat is a Mk2 with type number 4P2 and 4P2 isn't listed at Martin Baker

I'm sure I have a shot of one somewhere.. probably taken from the collection at Cosford. Anyways.. the Mk2 was fitted in such aircraft as the Hunter/Canberra/Attacker
ATB
DaveB

Re: Ejector seat £50 so far on e-bay! And vampire bits!
Posted: 20 Feb 2011, 19:23
by Garry Russell
I don' think it's from a Vanguard

Re: Ejector seat £50 so far on e-bay! And vampire bits!
Posted: 20 Feb 2011, 19:31
by Effoh
Anyone need to borrow my Grandad's hammer?

Re: Ejector seat £50 so far on e-bay! And vampire bits!
Posted: 21 Feb 2011, 00:10
by DaveB
John.. if this makes anything clearer, I find it difficult to keep track of 'Type' and 'Mk' numbers with these things. One would naturally assume that (for example) a Mk2 would have a 'type' number equating to 2.. eg, 2HC. This is how Martin Baker list them. However, Martin Baker don't have a Mk2 4P2 listed on their website!

Look in a different direction toward Cosford and I found a shot of a Type 4P seat they have and it comes from a Jet Provost. MOST of Cosfords seats are listed by Type.. not by Mk.
Bottom line.. that seat
may come from a Jet Provost. A safer alternative.. borrow Colin's grandad's hammer

A bit excessive but I have a 7lb 'sledge' I can send at a moments notice too should it be necessary
ATB
DaveB

Re: Ejector seat £50 so far on e-bay! And vampire bits!
Posted: 23 Feb 2011, 21:01
by marcus
Looked through my manual at work and that doesn't look like a MK2, there doesn't appear to be any legs attached to the bottom of the seat like a MK2 should have. Without better photo's it's hard to determine what type it is.
Re: Ejector seat £50 so far on e-bay! And vampire bits!
Posted: 23 Feb 2011, 21:26
by John
£113.00 and 10 minutes left!
Thanks for your ideas as to what it might be from chaps most interesting!
Kind regards
John
Re: Ejector seat £50 so far on e-bay! And vampire bits!
Posted: 23 Feb 2011, 21:27
by DaveB
Hi Marcus..
Yes.. it's a bit of a mystery isn't it. No Mk2 looks like that at Martin Baker as far as I can see. Perhaps the clue is in the Type number.. 4P2. The 4P fitted to the Jet Provost looks
similar but the lower seat front doesn't look quite the same

Would the 4P2 indicate a 4P Mk2?

Seems unlikely that anything would be designated so doesn't it. Small 'stamped' 4P2 and large embossed Mk2 would indicate the opposite.. to me anyway
No thanks John
ATB
DaveB

Re: Ejector seat £50 so far on e-bay! And vampire bits!
Posted: 23 Feb 2011, 21:28
by John
I was sorely tempted
JR
Re: Ejector seat £50 so far on e-bay! And vampire bits!
Posted: 23 Feb 2011, 21:34
by DaveB
If it's not gone John.. you know that we're all behind you offering support for your purchase
ATB
DaveB
