Morning All,
Just to add my findings to the pot.
I have just completed a flight from LEZG to EGGW in G-ATTP using the new client. No fuel problems at all...
I have then booked a flight from EGGW - LFMN in the same Aircraft. FSA.net and the stats page both agreeing that G-ATTP has 1720 Kg of fuel on board. Upon loading the client and going to the Fly! tab, I discover that I have 131 Kg of initial fuel and a suggestion in the additional fuel box of 1571Kg. For the flight I would like to add 4500 Kg of fuel.
The thoughts are that the 1571 Kg and 131 Kg figures added together give 1702 Kg, not far off the amount that I should have on board.
Why is the client giving a figure in the additional fuel box, it never used to?
and should I change the figure in the add fuel box to 4500 Kg and hope or should I add the 1702 Kg to this and risk having very full tanks.
I will have a quick look at FSA forums and then probably go for option 2 as at least that way I will have tanked for the return.
EDIT: I have looked at FSA and could not find anything of any relevance as I try to use the simple fuelling method. Have just tried to add the 4500 Kg of fuel in the client and on the flight page I get a value of 4630 Kg on board. Exited and tried again, this time adding 5700 Kg of fuel and got a value of 5831 Kg on Board.
I therefore take it that we either have to pay extra for the fuel that should already be onboard that we are replacing, or not fly (again) as the new client has been released and does not work (as usual).
EDIT EDIT
Just tried to fuel up not in simple mode and by filling tanks seperately it seems to work.

Just a bit of maths to do that's all.
Still do not understand the info on the left hand side of the client while loading.
Initial Fuel 131 Kg
Added fuel 1571 Kg
Loaded fuel 1720 Kg ?
Don't know where the initial fuel value comes from as flight was saved from previous flight and tanks agreed with my figures. Still no time to ponder now, it's time to :flying:
TTFN