Classic British Flight Sim

Hi Peter,

Just curious, but on mine the landing lights etc on the comet are modeled and are commented out in the [LIGHTS] section. Do your settings override modeled lights?

XR219 wrote:Hi Peter,

Just curious, but on mine the landing lights etc on the comet are modeled and are commented out in the [LIGHTS] section. Do your settings override modeled lights?

No, I can't do anything about the Modelled Lights...They will continue to show regardless of anything you do in the Aircraft.cfg file...My numbers just superimpose shockwave lights over the modelled ones. That is why you can see that Modelled third landing light when only the two Landing Light switches are on...The model has that light as a Landing Light but the panel with the switches has TWO landing light switches and Three taxilight switches.

I have given it a light for each switch but nothing I do will stop that Third Modelled landing light from showing when only the TWO landing light switches are on.

I have only placed these lights as an academic exercise...In my opinion the original Modelled lights look pretty nice anyway

Thanks for that Peter... I'll give it a go anyway as FSX doesn't like the modeled lights much (the materials problem I think). Thanks for doing the numbers.

Here's the config for the Valetta and Varsity:



[LIGHTS]
light.1=4, 14.0, 0.0, 1.0, fx_vclight,
light.2=4, 6.33, 0.0, 0.0, fx_vclight_Viking ,
light.3=4, 1.33, 0.0, 0.0, fx_vclight_Viking ,
light.4=4, -4.33, 0.0, 0.0, fx_vclight_Viking ,
light.5=4, -9.33, 0.0, 0.0, fx_vclight_Viking ,
light.6=4, -14.33, 0.0, 0.0, fx_vclight_Viking ,
light.7=1, -10.0, 0.0, 4.82, Fx_shockwave_beacon_rotating_red ,
light.8=1, -10.0, 0.0, -6.15, Fx_shockwave_beacon_rotating_red ,
light.9= 5, 0.25, 28.0, -2.5, fx_Shockwave_landing_light_tail_old
light.10=5, 0.25, -28.00, -2.5, fx_Shockwave_landing_light_tail_old

Best wishes

Nige

Edited by Rick to remove emoticons

Thanks Rick - I hadn't noticed !

Nige

Here's a config for Bill Holker's B2 Canberra (fuel) v2 now with seperate taxi lights and rainwash:



[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0 = 3, -18.26, 0, 2.65, Fx_shockwave_navred
light.1 = 1, -18.26, 0, 2.65, Fx_shockwave_beacon_rotating_red
light.2 = 3, -20.96, 0, -2.95, Fx_shockwave_navred
light.3 = 1, -20.96, 0, -2.95, Fx_shockwave_beacon_rotating_red
light.4 = 3, -0.4, -30.1, 1.9, Fx_shockwave_navred
light.5 = 3, -0.4, 30.25, 1.9, Fx_shockwave_navgre
light.6 = 3, -37.52, 0, 2.58, fx_navwhi
light.7 = 4, 10, -0.41, 1.95, fx_vclight
light.8 = 3, 1.404, -31.202, .863, Fx_shockwave_navred
light.9 = 3, 1.304, 31.202, .863, Fx_shockwave_navgre
//-----------------Wing Vortex-------------------------------
light.10=2, -5.8, -30.00, 0.0, fx_Hawkwingtip
light.11=2, -5.8, 30.00, 0.0, fx_Hawkwingtip
//light.12= 5, 0.25, 15.00, -0.500, fx_Shockwave_landing_light_tail_old
light.12= 5, -1.25, -16.00, -0.500, fx_Shockwave_landing_light_tail_old
light.13 = 5, -1.25, -15.00, -0.500, fx_shockwave_landing_light_light , //shockwave light
light.14=8, -35.70, 10.60, 3.60, Rainwash
light.15=8, -35.70, -10.60, 3.60, Rainwash
light.16 =6, 1.04, -30.15, 1.9, fx_Shockwave_landing_light_tail_old
light.17 =6, 1.04, 30.15, 1.9, fx_Shockwave_landing_light_tail_old
light.18 =6, 1.04, -30.15, 1.9, fx_shockwave_landing_light_light , //shockwave light
light.19 =6, 1.04, 30.15, 1.9, fx_shockwave_landing_light_light , //shockwave light



Best wishes

Nige

DaveB - thanks for your help posting these shots - I've just set up image hosting over at the pond so shouldn't need to bother you any more!! Thanks mate CHEERS

Nige

Hi Nige..

Oeky doh matey. I presume you still wanted this one too..



ATB

DaveB :tab:

Thanks Dave

Best wishes

Nige

No prob Nige ;-) Just noticed I devised a new way to spell okey in that last post too.. Oeky :think:

ATB

DaveB :tab:

"Oeky"......Sampling your stock David...... :think:



Tony

Not bad is it!! ;-)



ATB

DaveB :tab: