Page 3 of 3
Re: Converting the Jaguar to AI
Posted: 11 Apr 2008, 12:08
by fmansam
Its alive...it's alive
many thanks for your help gents...as per.....
Graham came up with the little one that i was forgetting..... :o :o

:doho: HELP
im all sorted now, jags everywhere.....
cheers again
Neil
Re: Converting the Jaguar to AI
Posted: 11 Apr 2008, 12:44
by ukmil
watch out for our next scenery release, RAF Colt, with lots of AI jags

Re: Converting the Jaguar to AI
Posted: 14 Apr 2008, 00:06
by igorski
Neil,
you should probably just try this:
http://library.avsim.net/esearch.php?Ca ... 1&Cookie=1
Uses Nick's AI jag model GR3 and T4, cant go wrong.
Re: Converting the Jaguar to AI
Posted: 14 Apr 2008, 00:15
by DaveB
He's obviously made a complete prat of himself (easy to do) Andy as he never told us what he'd missed. My guess is.. he either entered it in the aircraft.txt but didn't enter it in flightplan.txt or.. made a flightplan for it but didn't enter it into the aircraft.txt. There's only so much you can do to 'F'-up a traffic file.
Whatever.. he sorted it without using a 'Pack' so has his Jags as he want's them.. not as someone else does ;-)
ATB
DaveB :tab:
Re: Converting the Jaguar to AI
Posted: 14 Apr 2008, 00:31
by igorski
True.. at least the true AI model might be useful

Re: Converting the Jaguar to AI
Posted: 14 Apr 2008, 10:23
by fmansam
Hi gents
i have been working over the past few days, so unable to get much on....
just thought i'd let you know what i did wrong, as NOT to make myself look to bigger PRAT!!!! :o STUPID
TTools was my problem, and it was the size of the parking slot...
eg i had it as MIL-COMBAT as required, but the size was only 10m when it needed to be 12m i also found thats the parking size for a T2 or T4 was again slightly bigger than that. obviously a simple mistake, but i aint no pro, thats the reason i asked for help.
i did say thanks before to the gents that helped, and again my reason for using the ALPHA Jag is so i can get varied paint schemes and loads for the Jag as there are more available than for Nicks awesome AI, in fact i have Mr Ito's model as well, again more paints etc....
neither have any effect whatsoever on FR. so im greedy and have 3 AI jags now......! CHEERS
Thanks you again for your time and help.
Neil
Re: Converting the Jaguar to AI
Posted: 14 Apr 2008, 10:30
by Garry Russell
Thanks for the report back Neil
Useful information as you won't be the first of the last to be caught out by that
So.....size is important ;-)
Garry
Re: Converting the Jaguar to AI
Posted: 14 Apr 2008, 10:41
by fmansam
in no order, just set upto test appearance.....
as you can see my point about loads and paints!!!
Re: Converting the Jaguar to AI
Posted: 14 Apr 2008, 11:18
by DaveB
Cheers Neil ;-)
I did
say look at parking didn't I

There is ALWAYS a reason for something not working.. some obvious and some not so obvious so you have to keep chipping away until it
does work

I sent some AI Grimnods up to Kinloss a while ago (the default scenery) and they showed very nicely until takeoff time. The lights would come on and the aircraft were active but after a minute, they disappeared! :o M$ had kindly put parking slots in the scenery but no nodes to enable the aircraft to get from them to the taxiway (or something ridiculous like that) :brick: A day wasted until I twigged what it was causing the problem :doho:
ATB
DaveB :tab: