AIRSPEED CONSUL BETA
Moderators: Guru's, The Ministry
Re: AIRSPEED CONSUL BETA
Thanks Gents for all your tests and comments -
So, I've now tweaked and modded where appropriate to the point where I can now publish to the world.
Individual comments -
a) no Peter - my other paint choice was AHEG in its pale grey and white with red cheat lines but ... didn't want to rob you of the pleasure.
b) Keith has done some great work on the aircraft.cfg and .air files - these now will replace my originals - thanks Keith
I've also remapped the fuselage interior - it had got distorted as I cut out the additional windows: also fixed the fuselage - fin gap.
c) I've fixed the spinner wobble Okami and dropped the V.C eye height. This is a tricky one as various photos of this aircraft and the Oxford show pilots
peering through both above and below the window bar - depending on their height I suppose.
d) For my textures on this aircraft Keith I've used the following values - specular level - 0, glossiness - 10, soften - 0.1, ambient 150, 150 ,150, specular - 228,228,228.
These values were just arrived at by 'suck it & see' as was the alpha grey value (which is different on various parts like the gear).
Thanks again all - I'll just let it rest for a day of two before releasing it.
Cheers
Dave M(oly)
So, I've now tweaked and modded where appropriate to the point where I can now publish to the world.
Individual comments -
a) no Peter - my other paint choice was AHEG in its pale grey and white with red cheat lines but ... didn't want to rob you of the pleasure.
b) Keith has done some great work on the aircraft.cfg and .air files - these now will replace my originals - thanks Keith
I've also remapped the fuselage interior - it had got distorted as I cut out the additional windows: also fixed the fuselage - fin gap.
c) I've fixed the spinner wobble Okami and dropped the V.C eye height. This is a tricky one as various photos of this aircraft and the Oxford show pilots
peering through both above and below the window bar - depending on their height I suppose.
d) For my textures on this aircraft Keith I've used the following values - specular level - 0, glossiness - 10, soften - 0.1, ambient 150, 150 ,150, specular - 228,228,228.
These values were just arrived at by 'suck it & see' as was the alpha grey value (which is different on various parts like the gear).
Thanks again all - I'll just let it rest for a day of two before releasing it.
Cheers
Dave M(oly)
-
- Vintage Pair
- Posts: 2580
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: AIRSPEED CONSUL BETA
Specular level = 0, thats the main one I would say needs increasing, as well as a bit more gloss value. My values also empirical, but with my WIP I'm experimenting even more, but mainly in the texture department.
Glad the new FDE works for you.
Keith
Glad the new FDE works for you.
Keith
Re: AIRSPEED CONSUL BETA
Keith - are you thinking the arcraft needs more gloss ? if it did then I would play with the alpha layer values. Setting the gloss in the .mdl 'freezes' it so then no variation can be made by repainters. Anyway, I'm satisfied with the modest level on this model.
On to radios - here's the only photo I found of a Consul cockpit -
Note the radio stack crammed under the starboard panel - I used this as my starting point. Because the Consul was in use during a time of rapid airborne radio development, I've provided a) a V.H.F. comms set, b) a nav set for the new-fangled VOR.s and ILS systems and c) an ADF set for the NDBs and local radio stations.
Cheers
Dave M(oly)
On to radios - here's the only photo I found of a Consul cockpit -
Note the radio stack crammed under the starboard panel - I used this as my starting point. Because the Consul was in use during a time of rapid airborne radio development, I've provided a) a V.H.F. comms set, b) a nav set for the new-fangled VOR.s and ILS systems and c) an ADF set for the NDBs and local radio stations.
Cheers
Dave M(oly)
-
- Vintage Pair
- Posts: 2580
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: AIRSPEED CONSUL BETA
Dave, Yes I know it 'fixes' it for other textures, but I find it best because it creates the shine highlights & gloss according to the shape of the object, a bit like adding a reflect map on very shiny metal or glass. I don't think the alpha layer does that & one has to be careful that too much alpha can make it see through at night.
Nice find for the cockpit shot.
Keoth
Nice find for the cockpit shot.
Keoth
- blanston12
- Vintage Pair
- Posts: 2799
- Joined: 28 Jun 2004, 20:45
- Location: San Francsico, California
Re: AIRSPEED CONSUL BETA
Any possibility of an FSX native version of this beauty?
Joe Cusick,
I am serious, and don't call me Shirley.
I am serious, and don't call me Shirley.
Re: AIRSPEED CONSUL BETA
Sorry - not from me, I only build for FS9/FSX which means no P3DV4.
Cheers
Dave M(oly)
Cheers
Dave M(oly)
- blanston12
- Vintage Pair
- Posts: 2799
- Joined: 28 Jun 2004, 20:45
- Location: San Francsico, California
Re: AIRSPEED CONSUL BETA
You really should try, I think it could be a life changing experience
Joe Cusick,
I am serious, and don't call me Shirley.
I am serious, and don't call me Shirley.
-
- Vintage Pair
- Posts: 2580
- Joined: 10 Jul 2009, 08:33
- Location: Chacombe about 2 mile east of M40 J11
Re: AIRSPEED CONSUL BETA
Nervous breakdown more likely, I had enough problem loading FSX version of Gmax, & getting all the animations so far has defeated me!
Keith
Keith
Re: AIRSPEED CONSUL BETA
Agreed Keith -
Not sure I need such hassle at my time of life. It's probably a job best left to the long winter evenings.
Cheers
Dave M(oly)
Not sure I need such hassle at my time of life. It's probably a job best left to the long winter evenings.
Cheers
Dave M(oly)
Re: AIRSPEED CONSUL BETA
Good news
I've just uploaded the Consul to Flightsim.com where it will be appear in a couple of days after their scrutineering.
Thanks to you all for your beta testing.
Cheers
Dave M(oly)
I've just uploaded the Consul to Flightsim.com where it will be appear in a couple of days after their scrutineering.
Thanks to you all for your beta testing.
Cheers
Dave M(oly)