Page 2 of 3
Re: Needing a change
Posted: 27 Sep 2009, 22:38
by nigelb
Brian, thanks so much for posting this link. I have only just got around to trying it and it is a fantastic aircraft. I certainly agree with your "amazing" comment.
I had trouble at first with climb performance above 25,000 ft - speed would decay until you had to level off or descend. Then I discovered a fix online for the aircraft.file:
[TurbineEngineData]
fuel_flow_gain =0.0025
inlet_area =1.4000 //was 4.4000
rated_N2_rpm =29920
static_thrust =3500
afterburner_available =0
reverser_available =1
Changing the inlet_area parameter as per above fixed the issue. If anyone is having problems with the climb performance, try that fix.
Nigel²
Re: Needing a change
Posted: 28 Sep 2009, 14:14
by FlyTexas
Thanks for the climb rate fix, Nigel. She climbs like a home-sick angel, now.
Brian
Re: Needing a change
Posted: 28 Sep 2009, 15:49
by forthbridge
Cheers for that. I've only done a few circuits with her up to now, but that will come in handy

Re: Needing a change
Posted: 28 Sep 2009, 22:04
by nigelb
Apparently that inlet_area =4.4000 was a mistake in the aircraft.cfg file because if you check the falcon50.air file the value in record 1501 for "Intake throat area (sq,ft)" is 1.400. The incorrect value in the original aircraft.cfg file would overide this.
I was intially leery of making that change but after I found the enrty in the .air file, my hesitation vanished.
Nigel²
Re: Needing a change
Posted: 29 Sep 2009, 19:18
by Effoh
Hi Jim,
Not a jet, but try Milton Shupe's Beech 18
http://library.avsim.net/esearch.php?Ca ... DLID=69176.
You can even fly it in a 'hame strip'
http://library.avsim.net/esearch.php?Ca ... DLID=71201
Yours aye,
Colin
Re: Needing a change
Posted: 29 Sep 2009, 20:32
by forthbridge
Cheers Colin, I'll have a wee tinker with that I think....

Re: Needing a change
Posted: 29 Sep 2009, 22:35
by Effoh
Welcome Jim - enjoy!
Re: Needing a change
Posted: 04 Oct 2009, 01:54
by austerdriver
Where can I find that Falcon 50 mentioned earlier in this thread??
Re: Needing a change
Posted: 04 Oct 2009, 04:37
by FlyTexas
Yikes! Looks like the website has been updated. I hate to post a direct link but here is another copy of the updated Falcon 50.
http://www.mediterraneavirtual.com/fs9/ ... lcon50.exe
Brian
Re: Needing a change
Posted: 04 Oct 2009, 05:30
by austerdriver
Brian, is that the version for FS2004?